Resin Jewelry for Beginners: Your First Brooch with Premium Molds 💎
If you've ever wanted to try resin jewelry for beginners, a brooch is the perfect first project. It's small, it doesn't need much resin, and the silicone mold does most of the shaping work for you.
In this guide we'll walk through everything step by step: choosing a mold and the right resin, mixing a small batch, pouring without bubbles and adding color and a metallic touch. By the end you'll have a brooch you'll actually want to wear — or give away. 💎
1. Choose Your Resin Brooch Mold: Crystal or Glossy Finish
The Artline Premium Silicone Molds come in two finishes, and the choice changes the whole look of your brooch.
Crystal finish molds have faceted surfaces that catch the light and sparkle like a cut gem. Glossy finish molds give a smooth, mirror-like surface that looks clean and modern. All brooch molds are only 0.5–0.7 cm deep, which makes them easy to fill in a single pour.
See the difference in motion:
2. Pick the Right Resin for Resin Jewelry
There's no single "right" resin for brooches — it depends on the look you want. All three Artline resins below mix 2:1 by weight and work for small jewelry molds; each one just does a different job best.
3. How Much Resin Do You Need for a Brooch?
Very little! Use this simple formula: length × width × depth (cm) × 1.1 = grams of resin.
For a 5 × 4 cm brooch that's 0.5 cm deep: 5 × 4 × 0.5 × 1.1 ≈ 11 g. So a 30 g batch (20 g resin + 10 g hardener) is enough for two or three brooches, with a little left for small test pieces.
Don't want to do the math? Our free Resin Calculator works it out for you: choose the shape, size, depth and project type, and it shows exactly how much mixed resin you need.
Open Resin Calculator4. How to Make a Resin Brooch: Step by Step
- PrepareWork at 22–25 °C. Make sure the mold is clean, dry and dust-free, and place it on a level surface.
- MeasureWeigh resin and hardener at 2:1 by weight.
- Mix slowlyStir for 3–5 minutes, scraping the sides and bottom. Pour into a clean cup and mix for 1–2 minutes more.
- Add color (optional)Only after resin and hardener are fully mixed.
- PourFill the mold in a thin, steady stream until the resin is level with the edge.
- Remove bubblesA light mist of Bubble Release Spray clears surface bubbles in seconds.
- Let it cureCover the mold from dust and wait before demolding: 18–24 hours for Crystal, about 16 hours for Honey.
Bubble Release SprayShop Now
5. Add Color & Details 🎨
Clear resin in a crystal mold already looks beautiful. But if you want color, keep it simple: one shade, or one shade plus a metallic accent.
A tiny drop of Pigment Paste gives a translucent tint, more gives a solid color — mix it into Honey for the most even result. Chameleon Pigments add a color-shifting shimmer, and Alcohol Inks create soft, dreamy patterns. After curing, trace edges or details with Liquid Foil — see our Liquid Foil guide for techniques.
6. Finish Your Brooch
Extra Honey Epoxy ResinShop Now
Once the resin has fully cured, gently flex the silicone and push the brooch out from the back. Premium molds are flexible, so the piece releases easily without force.
Check the edges and lightly sand any sharp spots if needed. For an extra-glossy, slightly domed look on glossy-finish brooches, add a thin layer of Extra Honey on the front and let it cure for 12–15 hours.
Then attach a brooch pin to the flat back with a strong jewelry glue suitable for resin, and let the glue dry fully before wearing.
Ready to Make Your First Resin Brooch? ✨
Start with one mold, one resin and one accent color: Crystal for a clear, sparkling piece or Honey for a colored one. Once you've made your first brooch, you'll want a whole collection — and the same mold can look completely different with every new color. For more ideas on making your pieces look high-end, read How to Make Resin Pieces Look Expensive.
Explore all Artline Premium Silicone Molds and choose your favorite shape:
